Hello,
I have a question on flight plans. I have a flight plan loaded and activated using the GTN750xi. Can I also load this same flight Plan onto the GTN650? Both displaying information from the same flight plan. Any help is appreciated.
Thank You,
Kevin W. Ray
(05-10-2024, 01:27 AM)KiloWhiskeyRomeo Wrote: [ -> ]Hello,
I have a question on flight plans. I have a flight plan loaded and activated using the GTN750xi. Can I also load this same flight Plan onto the GTN650? Both displaying information from the same flight plan. Any help is appreciated.
Thank You,
Kevin W. Ray
You should be able to. When flying the FSW C414AW, I have two GTN750xi’s and I’m able to enter/load/import a flight plan into both. As far as I know however, autopilot guidance only works with one of them. You can’t transfer a flight plan from one to the other.
Lantz
Hello,
This is correct, at this moment we do not crossfill flight plans from one unit to the other, so the same flight plan must be imported separately.
As far as the autopilot, it is as stated by Lantz above, only one unit can control the autopilot, this is described in detail in the TDS GTNXi manual, the navigation source section.